Walls

Decorating the kitchen with wall panels

Wall panels have become very popular relatively recently. These materials can radically change the design of an apartment without requiring a lot of money. The wall panels are very easy to maintain, they practically do not get dirty and are distinguished by good durability, therefore they are ideal for the kitchen. You can transform classic walls into unique style compositions, come up with a unique interior and fill it with beautiful decorations. Today we will look at how the kitchen is decorated with wall panels..

Content:

Preparing to install panels

First, you should prepare all the materials that you may need. Therefore, buy in advance: wall panels, corners, wooden slats, dowels, level, staples, tape measure, profiles, pencil, screws, protective impregnation, etc. Then assess the level of flatness of the surface to which the panels are to be mounted. If the walls in the kitchen are perfectly flat (which is unlikely), you can attach the panels directly to the wall using glue. This option only applies to kitchens with normal humidity levels..

If high humidity prevails in the room, you will have to install a wooden frame. It can also be installed if the room has uneven walls. In this case, some space remains between the wall and the kitchen wall panel, which can be filled with insulating material. In addition to sound insulation, it retains heat, therefore, heating costs are reduced. In addition, in this way, you can hide the electrical wiring, under which you do not need to groove the walls..

If the walls are not too level and you are not going to use a frame, you need to prepare them for finishing. To do this, thoroughly clean the walls from dust, dirt and let it brew. Be sure to remove any remaining old decorative coating, paint, or wallpaper. Any unevenness should be removed with a quality filler suitable for the type of surface. After that, you should walk along the walls with emery..

Calculation of material for installation

Before fixing the wall panels in the kitchen, calculate their number. To do this, it is imperative to know the dimensions of the wall panels for the kitchen. Please note that there should be no mistakes. Measure the width of the kitchen walls and divide it by the panel width. Thus, you will receive the number of products required for finishing. It may not come out whole. If this happens, you will have to carefully cut one panel and make it fit..

If there is a window, doorway, or arch in the wall, this area needs to be measured. After that, subtract the resulting number from the length of the wall. For wall decoration you will need profiles and corners with which you can fix the wall panels in the corners. It is recommended to leave gaps as panels (especially sheet panels) can expand over time. The height of each piece should be one centimeter less than the distance between the floor and the ceiling.

After that, you can cut the pieces to the desired size. If you will be using a hacksaw, it is advisable to cut from the front of the cover. If you plan to use a circular saw, you will need to cut the pieces from the base side. First, carefully cut the cover, then cut the panel itself with more force. When cutting, try to keep the carpet knife strictly perpendicular to the panel..

For perfectly cut straight lines, it is best to use a straight strip or ruler. For sockets and switches, you need to cut the appropriate holes in the material. Before fixing the wall panels to the kitchen, they must lie in a room with a room temperature for more than twelve hours, so that the humidity levels of the building materials and the ambient air can come closer to each other. So unpack the box and leave the stuff for a while..

Wall panel gluing procedure

The sheets can be glued using acrylic, silicone or all-purpose building adhesive. It is advisable to study the adhesive composition on the packaging and perform all actions, taking into account the advice of the manufacturer. First, the wall panels are glued to the inner corner of the room, and then along the perimeter. The adhesive should be applied to the entire surface of the material..

Apply glue in even strips along the long edges, three centimeters from the edge and a little glue to the center every twenty centimeters. Do not join the panels closely, leave small gaps of a few millimeters. Subsequently, they should be filled with silicone sealant. The same small gaps should be left at the joints of the panels with windows, corners and doors..

On the edges of each sheet metal wall panel for the kitchen, it is necessary to install plastic profiles of a suitable color and fill them with a sealant. After that, it is necessary to firmly press the panels against the wall and tap with a hammer so that the glue can adhere well. For better fixing of the material, you can attach a temporary support made of wood. Wipe off excess sealant with a clean cloth and additionally reinforce the sheets with nails or screws (if necessary).

Fastening panels to a wooden frame

Once you’ve decided on a timber frame, start with the foundation first. Prepare wooden blocks for installing the frame. The thickness of the bars should depend on whether a heater is planned between the frame and the panels, which will additionally soundproof the room and make it more comfortable. It is worth noting that the wall panels themselves are soundproof..

Next, you should mark the walls. Remember that if the wall panels are to be placed vertically, then the slats should be placed horizontally. With the help of such an amazing material as wall panels, you can finish the walls in the kitchen vertically, horizontally or diagonally. You can choose a suitable color palette and bring any idea to life. In any case, the frame should be positioned perpendicular to the direction of the wall panels..

According to the markings, you should fix the bars to the surface with self-tapping screws and dowels. Remember to leave a distance of fifty centimeters between the bars. Otherwise, the wall panels will not have the necessary stop points when fastening. Before installing plastic wall panels for the kitchen, the frame must be treated with a special protective impregnation. Otherwise it may deteriorate due to humid air. Then you should install the corner profiles for the installation of wall panels using brackets.

And only now you can proceed to the installation itself, which should start from the left inner corner. Then you can move to the window or door. Insert the edge of the first panel into the groove in the corner. The fixing edge of the panel must be installed on wooden battens. You can use staples for fastening.

The second panel fits into the groove of the first. Its fastening edge must be fixed to the batten. All other panels are installed in the same way. Remember to check the verticality with a level. The last panel is inserted with the edge into the groove of the corner, it closes the connection. When all the kitchen walls are covered with panels, you can install skirting boards between the walls and the floor, as shown in the photo of the kitchen wall panels..

Recommendations when installing panels

When installing wall panels in the kitchen, some inaccuracies and inconsistencies may occur. To prevent this kind of situation, we recommend using a little trick. And they are as follows:

Thus, it becomes clear that wall panels are a very good solution for decorating a kitchen. And it doesn’t matter if you are pursuing the concept of a budget renovation option, or the price of kitchen wall panels does not play a significant role for you. If you want to install such material yourself, you should plan the entire process in advance. With the correct and consistent implementation of all points, the installation of wall panels in the kitchen will be easy and successful. We wish you an impeccably finished kitchen and enjoy the fruits of your labors for a long time.!